MEP-8TM压合机
产品简介
详细信息
MEP-8TL system description Mep-8TL 系统描述
30”wide opening and 36” depth table 30 英寸(762 毫米)宽和36 英寸(914.4 毫米)深 度 台面
Approx. 24”x 36” PCB 大约 24 英寸(609.6 毫米)x 36 英寸 (914.4 毫米)PCB
All electric press, H-frame design, 8 ton capacity 全电子压接,H 型设计,8 吨压力
Approx. force resolution 65,000 at 16 bit ADC system 大约 65000 点,16bit 数模转换系统
Windows 7 PC control with touchscreen monitor, keyboard, mouse Windows 7 PC 控制拥有触摸屏,键盘,鼠标
Full force available throughout travel 全行程压力监控
Head is manually moveable throughout the opening 压头可在横向手动移动
Flat rock press head 10” x 1.5” 10 英寸(254 毫米)x1.5 英寸(38.1 毫米)平整压头
Manual head rotation (0, 90 degrees) 压头可手动旋转(0,90 度)
Aluminum PCB support plate, Teflon hard coated 铝合金制PCB 支撑台面,铁氟龙加硬
2-Stage Force and True Distance Measurement 两段力监控和真实距离测量
Press to force or height with error detection 力或高度的压接伴随错误侦测
Dynamically adjusted force using PAST (also called PAR) or FAT (also called Force Gradient) 动态调节压力通过应用PAST
(采样力)or FAT (压接曲线斜率)
Fully automatic setup, no manual adjustments 全自动的设定,无手动调整
Board thickness measurement 板厚测量
SPC data gathering/display/printing included SPC 数据收集/显示/打印
110 or 220 VAC 1 phase, 20 amps, 50/60 Hz 单相110 或220 VAC ,20 安,50/60 赫兹
Air 80 psi for air table and sliding head air bearing 空气压力80psi 用于气动台面和压头 滑动
Approx. net weight 1400 lbs. 大约重量1400 磅
Shipping dimension 1 pallet 55” x 48” x 75” high, Approx. 1500 lbs. 装箱尺寸55 英寸x 48 英寸x 75 英寸
(1397 毫米x1219 毫米 x1905 毫米),毛重1500 磅