纺织服装机械网

JJ-548 热溶胶过胶机

特点：

1.本机适用于厚度0.5mm以上平面贴合上胶，诸如：鞋类、皮箱、皮件、文具、纸板盒类、运动器材等。

2.创新设计之上轮座能上下浮动及压力调整，针对高低不平、软、硬、前低后高材料亦均能上胶。

3.热熔胶槽经铁氟龙处理，换胶简单，可随热熔胶的特性调整温度，可有效地防止热熔胶碳化。

4.本机附定温装置，保护马达故障，并装设吸排气机，可排除异味及散热。

5.本机之作业动力马达采用变频器控制，转速可无段变速调整。

FEATURES

1.The plane applicable to the above graphic with a thickness of 0.5mm plastic,such as :footwear,leather box,leather,stationery,such as cardboard boxes,Sports equipment.

2.Block next to the design of innovative approaches for floating and pressure adjustment function,soft,hard,the former will be low after the high of plastic materials.

3.Rerongjiao shafts by Tiefulong treatment for plastic simple to adjust the temperatrue with Rerongjiao identity can effectively.prevent Rerongjiao carbonation./

4.The machine is set temperature devices to protect motor failure and the installation of smoke exhauster may exclude from reality and heat release.

5.The operation of aircraft used for motor transducer control,rotational speed.speed change can be no adjustment.