1、本机的所有滑动部位都由液压系统供油润滑,减少磨损,更加延长了机器的使用寿命。
2、当上压板快速下压到裁断刀模进行裁断作业时会自动慢切,使裁断物上下层之间没有尺寸误差。
3、本机在设计时结构的变化,让使用者不用担心机器有漏油之虞。
4、由于电机、油泵外置,其通风冷却条件好,运行安全,寿命长。
5、刀模设定快捷准确,简单易学。
6、电机功率小,能耗低。
a.Oil is supplied to all sliding parts of this machine by the hydraulic system for lubrication, reducing wear and prclonging the service life of the machine.
b. The upper platen may automatically cut slowly as it presses down rapidly to the knife mold for cutting so that there will be no dimension errors between the upper and lower layersof the cutting materials.
c. Structural changes during designing of this machine remove the need for the users to worry about possible oil leakage of the machine.
d. External motor and oil pump enable good ventilating and cooling conditions, safety operation and prolonged service life.
e. Setting of the knife mold is rapid, accurate and easy-to-learn.
f. Small motor power results in low power consumption.
技术参数:型号 | XCLP3-300 | XCLP3-350 | XCLP3-500 | XCLP3-600 | XCLP3-800 | XCLP3-1000 |
zui大裁断力 | 300KN | 350 KN | 500 KN | 600 KN | 800 KN | 1000 KN |
上压板至工作台距离 | 50-160mm | 50-160mm | 55-195mm | 50-200mm | 50-200mm | 50-200mm |
工作台面积 | 550×1600mm 550×1220mm | 610×1600mm 610×1220mm | 750×1600mm 750×1220mm | 900×1600mm 900×1220mm | 750×1600mm 750×1220mm | 900×1600mm 900×1220mm |
电机功率 | 1.5KW | 2.2 KW | 3 KW | 4 KW | 5.5 KW | 5.5 KW |
液压油量 | 150L | 180L | 200L | 220L | 320L | 330L |
机器重量 | 2500Kg | 3100 Kg | 3500 Kg | 4100 Kg | 4500 Kg | 5100 Kg |