焦热电能量探测器

919E系列焦热电能量探测器

参考价: 面议

具体成交价以合同协议为准
2022-08-29 10:37:31
407
产品属性
关闭
深圳市华智腾光电科技有限公司

深圳市华智腾光电科技有限公司

免费会员
收藏

组合推荐相似产品

产品简介

919E系列热电脉冲能量探测器采用创新的技术,可以实现大范围激光脉冲的精确可重复激光测量

详细介绍

919E 系列热电脉冲能量探测器采用创新的技术,可以实现大范围激光脉冲的精确可重复激光测量。

对比 型号 探测器类型 光谱范围 感光尺寸 重复频率 有衰减器时的脉冲能量
919E-0.1-12-250 Pyroelectric 0.15 to 3 and 10.6 µm Ø12 mm 250 Hz 10 mJ
919E-0.1-12-25K Pyroelectric 0.15 to 12 µm Ø12 mm 25 kHz 10 mJ
919E-10-20-250 Pyroelectric 0.24 to 2.2 µm Ø20 mm 250 Hz 10 J
919E-10-24-10K Pyroelectric 0.15 to 3 µm Ø24 mm 10 kHz 10 J
919E-10-35-10K Pyroelectric 0.19 to 2.2, and 2.94 µm Ø35 mm 10 kHz 10 J
919E-10-35-250 Pyroelectric 0.24 to 2.2 µm Ø35 mm 250 Hz 10 J
919E-200U-8-25K Pyroelectric 0.15 to 12 µm Ø8 mm 25 kHz 200 uJ
919E-20U-10-20K Silicon Photodiode 0.19 to 1.1 µm Ø10 mm 20 kHz 15 µJ @ <300 nm, 8 µJ @ 350-550 nm, 5 µJ @ >800 nm
919E-30-46-10K Pyroelectric 0.532, 1.064, 2.10, 2.94 µm Ø46 mm 10 kHz

30 J



产品规格

型号
919E-0.1-12-250 919E-10-35-10K 919E-30-46-10K 919E-10-20-250
探测器类型 Pyroelectric Pyroelectric Pyroelectric Pyroelectric
探测器材料 BF coating Metallic with removable diffuser BF with diffuser
光谱范围 0.15 to 3 and 10.6 µm 0.19 to 2.2, and 2.94 µm 0.532, 1.064, 2.10, 2.94 µm 0.24 to 2.2 µm
感光尺寸 Ø12 mm Ø35 mm Ø46 mm Ø20 mm
平均功率 3 W 25 W 40 W w/ diffuser, 15 W w/o diffuser 20 W
有衰减器时的脉冲能量 10 mJ 10 J 30 J 10 J
脉冲宽度 5 ms 20 ms 5 ms 20 ms
重复频率 250 Hz 10 kHz 10 kHz 250 Hz
噪声等效能量 1 µJ in 1 ms, 5 µJ in 5 ms setting 1 µJ in 2 µs, 40 µJ in 5 ms setting 1 µJ in 2 µs, 20 µJ in 5 ms setting (w/o diffuser) 15 µJ in 1 ms, 60 µJ in 20 ms setting
线性度 ±2% ±2% with energy for >7% of full scale ±2% with energy for >10% of full scale ±2% with energy > 7% of full scale
校准不确定度 ±3% basic, add ±2% @ 0.2-3 µm, ±5% @ 10.6 µm ±4% basic, add ±2% @ 0.2-3 µm, ±5% @ 10.6 µm ±4% basic, add ±2% @ 0.2-3 µm, ±5% @ 10.6 µm ±4% basic, add ±2% @ 0.2-3 µm, ±5% @ 10.6 µm
损伤阈值 0.8 J/cm2 (<100 ns pulse), 1 J/cm2 (1 µs), 2 J/cm2 (300 µs) 1 J/cm2 (<100 ns pulse), 2 J/cm2 (1 µs), 20 J/cm2 (300 µs), 40 J/cm2 (2 ms) 1.5 J/cm2 (<100 ns pulse), 3 J/cm2 (1 µs), 20 J/cm2 (300 µs), 60 J/cm2 (2 ms) 3 J/cm2 (<100 ns pulse), 5 J/cm2 (1 µs), 25 J/cm2 (300 µs), 50 J/cm2 (2 ms)
端口类型 DB15 DB15 DB15 DB15
工作温度 15°C to 35°C, <70% RH, non-condensing 15°C to 35°C, <70% RH, non-condensing 15°C to 35°C, <70% RH, non-condensing 15°C to 35°C, <70% RH, non-condensing
反射率 20% approx. 25% approx. 50% approx. w/o diffuser, 25% approx. w/ diffuser
尺寸 Ø62 x 21 mm Ø62 x 35 mm Ø62 x 28.5 mm Ø62 x 28.5 mm
电缆长度 1.5 m 1.5 m 1.5 m 1.5 m
RoHS Compliant Compliant Compliant Compliant


特征
The configuration of a typical pyroelectric sensor and its operational output can be seen in the above Figure. A pyroelectric material, which is usually crystalline, possesses an electric polarization, even in the absence of an applied voltage. An incident laser pulse heats the crystal, which causes the material to expand and produce a change in the polarization. Charge builds up on opposite surfaces of the crystal which generates a current flow that charges a capacitor. This charged capacitor induces a voltage whose amplitude change is proportional to the original laser pulse energy. Since it is the change in temperature that produces the current, pyroelectric detectors respond only to pulsed or modulated radiation. They respond much more rapidly to variations in radiation than thermopiles and are unaffected by steady background radiation. Please see our Pyroelectric Sensor Physics technical note for additional information.
光电二极管脉冲能量探头
919E-20U-10-20K 型号是一款用于低能量测量的光电二极管能量探头,其孔径为 10mm。该型号是市场上的校准能量探头之一。它可以测量从 1nJ 到 15µ
测量可达 25 kHz 的激光重复频率
919E 系列探头能够可靠测量高达 25 kHz 激光重复频率的能量脉冲。选择高脉冲能量探头可以测量 10 kHz 的重复频率。连接全新的 1919-R 手持式功率和能量计时,可记录的每个脉冲的脉冲能量可达 6 kHz。
传感器尺寸可高达 46 mm
不使用散射片时,919E-30-46-10K 的有效直径可至 46 mm。即使安装了散射片,有效直径也能达到 33 mm。此外,另外两个型号的直径为 35 mm。

NIST 可追踪校准


所有的探头都配备一个 DB15 连接器和内部 EEPROM,用于存储工厂校准数据,使其

直接兼容 Newport 的 843-R、843-R-USB 和全新的 1919-R 光功率和能量计。

脉冲能量的高灵敏度


除了 919E-20U-10-20K 型号,还引入了三个其他型号,可测量 10 mJ 脉冲的低脉冲。919E-200U-8-25K 是灵敏的焦热电探头,能够在 0.15 至 12 微米的宽光谱范围内测量到 1 uJ 的脉冲能量。请根据激光源的脉冲重复频率,在 919E-0.1-12-25 和 919E-0.1-12-250 间进行选择。

高能级可达 30 J


我们还提供了五种可以处理高脉冲能量的型号。尤其是 919E-30-46-10K,通过使用具

有高损伤阈值的经过校准的散射片,可测量高达 30 J 的能量。

替换过时的 818E 系列探测器


919E 系列脉冲能量探头用于替代原有的 818E 系列探头。然而,由于两个系列之间的技术差异,我们不提供直接替换交叉参考表。请联系 Newport,说明您的光源规格,以便我们向您推荐合适的 919E 系列探头。库存清空后,将不再销售 818E 系列探头。


提示

请选择您要拨打的电话: