品牌
其他厂商性质
所在地
| 配置标准 Model | 单位Unit | HDX2800 | |||
| 注射装置 Injection Unit | |||||
| 螺杆直径 Screw Diameter | mm | 200 | |||
| 螺杆长径比 | L/D | 20 | |||
| 注射容积 Injection Volume | cm3 | 33301 | |||
| 注射重量 Shot Weight | g | 30304 | |||
| 注射压力 Injection Pressure | MPa | 139 | |||
| 锁模装置 Clamping Unit | 合模力 Clamping Force | kN | 28000 | ||
| 模板行程 Opening Stroke | mm | 2000 | |||
| 导柱内距 Space Between Tie-Bars | mm | 1960X 1850 | |||
| 模具厚度 Mould Thickness(Min-Max) | mm | 800-1850 | |||
| 顶出力 Hydraulic Ejection | kN | 565 | |||
| 顶出行程 Ejector Stroke | mm | 480 | |||
| 其他 General | 油泵压力 Pump Pressure | MPa | 16 | ||
| 电机功率 Motor Power | kw | 55X4 | |||
| 加热功率 Heater | kw | 149.2 | |||
| 外形尺寸 Machine Dimension | m | 20.5X 4X 4 | |||
| 机器重量 Machine Weight | T | 205/210 | |||
| 模具定位圈直径 Mold Location Recess Diameters | mm | Φ315 | |||
| 喷嘴圆球半径 Nozzle Radius | mm | SR30 | |||
1. 双缸平衡式注射系统 Double-cylinder balance injection system
2. 多级压力, 多级速度射胶调整 Multi-stage pressure & speed injection
3.背压调节装置 Back _pressure adjustment device
4.倒索 Decompression
5.低压模保 Low pressure mold protection
6.多种液压顶出方式 Multiple hydraulic ejector knock-out
7.润滑系统 Lubrication system
8.油压安全比例控制 Hydraulic pressure full proportional control
9.全电脑控制 All computer control system
10.模具记忆系统 Molding data memory system
1. 机械防震脚垫 Mechanical leveling pad
2. 备用零件 Spare parts
3. 润滑脂 Lubrication oil
1. 干燥料斗 Drying hopper
2. 自动上料机 Auto-loader
3. 磁力架 Hopper magnet
4. 模具压板 Mold clamps
5. 液压旋转脱模 Hydraulic unscrew device
6.冷水机 Water cooler
7.模温控制机 Mold temperature controller
8.自动加色计量器 Auto color mixer with messuring device
9.油温控制器 Oil temperature controller
10.旁路滤油器 Oil bypass filter
理论注射容量＝(注塑机) 料筒截面积×螺杆行程
注射重量为PS理论注射容量的91% 塑化能力、注射速率为PS值
