品牌
其他厂商性质
上海市所在地
| 电流 Current | 40 A AC 60 A DC | 400 A AC 600 A DC |
| 输出 Ouput | 10 mV/A | 1 mV/A |
Model PAC12 is a high precision clamp-on current probe that operates using Hall effect technology for the measurement of AC and DC currents. It has a mV BNC output so the reading can be directly displayed on an oscilloscope and comes with an automatic DC zeroing system..
电气参数Electrical specifications
| 范围 range | 60A | 600A |
| 电流范围 Current range | 0.2...40 A (60 A peak) 0.4...60 A DC | 0.5...400 A (600 A peak) 0.5...600 A DC |
| 输出信号 Output signal | 10 mV/A | 1 mV/A |
| 输出信号精度 % Accuracy of output signal(1) | 0.5...40 A:1.5%R ±5 mV 40...60 A DC: 1.5% | 0.5...100 A:1.5%R ±1 mV 100...400 A DC: 2% 400...600 A DC: 2.5% |
| 相移 Phase shift (45...65 Hz) (1) | 10...20 A: < 3° 20...40 A: < 2° | 10...100 A: < 2° |
| 噪声 Noise | DC...1 kHz: < 8 mV DC...5 kHz: < 12 mV 0.1 Hz...5 kHz: < 2 mV | DC...1 kHz: < 1 mV DC...5 kHz: < 1.5 mV 0.1 Hz...5 kHz: < 500 μV |
| 上升/下降时间 Rise/fall time | ≤ 100 μs to go from10 to 90% Vout | ≤ 70 μs to go from10 to 90% Vout |
过载 Overload:
2000 A DC and 1000 A AC up to 1 kHz
带宽 Bandwidth:
DC...10 kHz at -3 dB
负载阻抗 Load impedance:
≥ 1 MΩ and ≤ 100 pF
插入阻抗 Insertion impedance:
0.39 mΩ at 50 Hz, 58 mΩ at 1000 Hz
工作电压 Working voltage:
600 Vrms
通常模式电压 Common mode voltage:
600 Vrms
相邻导体影响 Influence of adjacent conductor:
< 10 mA/A at 50 Hz
导线在钳口内位置的影响 Influence of conductor positioning in clamp’s jaws:
0.5% of reading
电池 Batteries:
9 V Alkaline (NEDA 1604A, IEC 6LR61)
电池寿命 Battery life:
50Hrs with Alkaline battery.
过载指示 Overload indicator:
Red LED
自动关闭 Auto switch-off:
After 10 min’s
机械参数 Mechanical specifications
操作温度 Operating temperature:
0 °C to +55 °C
存储温度 Storage temperature:
-30 °C to +80 °C
温度影响 Temperature Influence:
< 300 ppm/°K or 0.3%/10°K
< 0.3 A/°K
工作相对湿度 Operating relative humidity:
+10° to +35°C : 90 ±5% RH (without condensation)
+40° to +55°C : 70 ±5% RH (without condensation)
湿度影响 Humidity influence:
10 to 90% RH at reference temperature:< 0.1%
操作高度 Operating altitude :
0 to 2000 m
直流调零 Adjustment of DC zero:
Automatically operated by button (± 10 A)
夹持能力Max. jaw insertion capacity:
1 cable: 30 mm Ø or 2 cables : 24 mm Ø or 2 x 31.5 x 10 mm busbars
防护等级 Casing protection:
IP30 in accordance with IEC 529
跌落测试 Drop test:
1 m on a 38 mm container of oak on concrete, test in accordance with IEC 1010
冲击保护 Mechanical shock:
100 g (IEC 68-2-27)
抗振性 Vibration :
Test in accordance with IEC 68-2-6
频率范围 Frequency range:
5 to 15 Hz: amplitude: 1.5 mm
15 to 25 Hz: amplitude: 1 mm
25 to 55 Hz: amplitude: 0.25 mm
阻燃能力 Self-extinguishing ability:
Casing : UL94 V0
尺寸 Dimensions:
224 x 97 x 44 mm
重量 Weight: approx.
440 g
颜色Colours:
深灰色壳体和红色钳口 Dark grey casing with red jaws
输出Output:
2米长同轴线缆，带BNC头。
Via 2 m coaxial cable with insulated BNC plug.
安全规范 Safety Specification
电气 Electrical:
Double or reinforced insulation between the
primary, the secondary and the outer
casing in accordance with IEC 1010-1-2
(indoor use).
600 V category III, pollution: 2
300 V category IV, pollution: 2
电磁兼容性 Electromagnetic Compatibility
(EC Stamp):
EN 50081-1: class B
EN 50082-2:
- Electrical discharge IEC 1000-4-2
- Radial Field IEC 100-4-3
- Rapid Transients IEC 1000-4-4
- Magnetic Field to 50/60 Hz IEC 1000-4-8
(1)参考条件：18°C-28°C，相对湿度20％至75％，频率为48赫兹到65赫兹，外部磁场<40 A/ m时，没有直流分量，附近没有载流导体，测试样品中心，负载阻抗： 1 MΩ 且≤ 100 pF，测试前调零（仅直流测量之前），直流到65赫兹，电池：9 V±0.1 V。
(1) Reference Conditions : 18° to 28°C, 20 to 75% RH, 48 to 65 Hz, external magnetic field < 40 A/m, no DC component, no current carrying conductor nearby, centred test sample,load ≥ 1 MΩ and ≤ 100 pF, reset to zero before measurement (DC only) DC to 65 Hz, Battery 9V ±0.1 V.
