NV气体背压调节器

NV气体背压调节器

参考价: 面议

具体成交价以合同协议为准
2022-09-26 10:10:31
224
产品属性
关闭
天津金镭科技有限公司

天津金镭科技有限公司

免费会员
收藏

组合推荐相似产品

产品简介

APPLICATION:Ventlinesorpressureregulationonseparators,heatertreaters,compressorstations,gasgatheringanddistribut*temswhereitisdesiredthatnogasbevented

详细介绍

APPLICATION:
Vent lines or pressure regulation on separators, heater
treaters, compressor stations, gas gathering and distribution systems
where it is desired that no gas be vented.
• Inside Buildings
• In populated areas
• Emissions regulated areas
• Sour or poisonous gas systems
PRESSURE RANGE:
3 psig to 300psig
OPERATION:
Assume the PILOT SPRING is compressed with the ADJUSTING SCREW for a set pressure greater than theUpstream Pressure (Red). The Pilot Assembly is forced downward by the PILOT SPRING. The lower seat for the PILOT PLUG (Yellow to Blue) is closed and the upper seat for the PILOT PLUG (Red to Yellow) is open. This lets full Upstream Pressure (Red) load the MOTOR VALVE DIAPHRAGM to close the valve.
As the Upstream Pressure (Red) increases to the set pressure, the Pilot Assembly moves upward against the PILOT SPRING to first close the upper seat (Red to Yellow) and open the lower seat (Yellow to Blue). Motor Valve Diaphragm Pressure (Yellow) is vented to the Downstream (Blue).
As the Motor Valve Diaphragm Pressure (Yellow) is decreased, the Upstream Pressure (Red) acting under the motor valve seat, opens the valve. With relief of the Upstream Pressure (Red) through the valve, the Pilot Assembly assumes a position in which both seats of the PILOT PLUG are closed.
Motor Valve Diaphragm Pressure (Yellow) is regulated by the intermittent bleed pilot three-way valve action of the PILOT PLUG to reposition the Motor Valve Stem Assembly for changes in flow rate. The rapid but stable repositioning produces a true throttling action.


货号 连接尺寸 连接方式 描述 操作压力 工作压力 维修包
铸铁材质
A1204 1" SCRD 112 SGT BP-NV 125 175 R1820
A1205 2" SCRD 212 SGT BP-NV 125 175 R0101
A1206 2" FLGD 212 FGT BP-NV 125 175 R0101
A1207 2" GRVD 212 GGT BP-NV 125 175 R0101
A1208 3" SCRD 312 SGT BP-NV 125 175 R0102
A1209 3" FLGD 312 FGT BP-NV 125 175 R0102
A1210 4" SCRD 412 SGT BP-NV 125 175 R0103
A1211 4" FLGD 412 FGT BP-NV 125 175 R0103
A1212 6" FLGD 612 FGT BP-NV 125 175 R0104
球墨铸铁材质
A1204-D 1" SCRD 130 SGT BP-NV-D 300 300 R1821
A1205-D 2" SCRD 230 SGT BP-NV-D 300 300 R0407
A1206-D 2" FLGD 230 FGT BP-NV-D 300 300 R0407
A1207-D 2" GRVD 230 GGT BP-NV-D 300 300 R0407
A1208-D 3" SCRD 330 SGT BP-NV-D 300 300 R0408
A1209-D 3" FLGD 330 FGT BP-NV-D 300 300 R0408
A1210-D 4" SCRD 430 SGT BP-NV-D 300 300 R0409
A1211-D 4" FLGD 430 FGT BP-NV-D 300 300 R0409
A1212-D 6" FLGD 630 FGT BP-NV-D 300 300 R0110


上一篇:数字式电秒表测试功能主要技术指标
提示

请选择您要拨打的电话: