R&S FSQ8频谱分析仪
罗德与施瓦茨FSQ8信号分析仪将信号分析与频谱分析仪的动态范围和28 MHz的解调带宽结合在一起，FSQ26可以捕获和分析802.11a WLAN或多载波W-CDMA信号的整个宽度。
特点和优点：
- 20 Hz至8 GHz范围涵盖了微波频率下的杂散测量
- 28 MHz IQ带宽允许全跨度捕获802.11a WLAN和多载波W-CDMA信号
- 10 Hz至100 kHz数字RBW：数字RBW的扫频速度是模拟RBW的2.5倍，并且在较宽的功率范围内具有更高的精度
- 2x16 MB内存可深入分析代码功率与时间的关系，以便在越区切换期间检查基站操作并调查信道效应
- 通过消除用于寄生噪声测量的外部滤波器，在-10 MHz偏移处的-155 dBc简化了生产测试
应用范围： - WLAN-802.11a
- 2.5G和3G组件开发
- 多载波W-CDMA解调与分析
- 放大器生产测试
The Rohde & Schwarz FSQ8 Signal Analyzer combines signal analysis with the dynamic range of a high-end spectrum analyzer and a demodulation bandwidth of 28 MHz, the FSQ26 can capture and analyze the full breadth of an 802.11a WLAN or multiple carrier W-CDMA signal.
Features and Benefits:
- 20 Hz to 8 GHz range covers spurious measurements at microwave frequencies
- 28 MHz IQ Bandwidth allows full-span capture of 802.11a WLAN and Multi-carrier W-CDMA signals
- 10 Hz to 100 kHz Digital RBW: Digital RBWs can be swept 2.5 times faster than analog equivalents and have higher accuracy over wide power ranges
- 2x16 MB Memory allows in-depth analysis of Code Power vs. Time for examination of base station operation during handoffs and investigation of channel effects
- -155 dBc at 10 MHz Offset simplifies production testing by eliminating external filters for spurious noise measurements
Applications:
- WLAN - 802.11a
- 2.5G and 3G Component Development
- Multiple Carrier W-CDMA Demodulation and Analysis
- Amplifier Production Test
