QCS汽车内饰燃烧测定仪
一 产品介绍
本仪器用于测定汽车内饰材料水平燃烧特性。内饰材料指：汽车内饰零件所用的单一材料或层积复合材料，如座垫、座椅靠背、座椅套、安全带、头枕、扶手、活动式折叠车顶、所有装饰性衬板（包括门内护板、侧围护板、后围护板、车顶棚补里）仪表板、空内货架或后窗台板、窗帘、地板、覆盖层、遮阳板、和其它任何室内有机材料，包括撞车时吸收碰撞能量的填料、缓冲装置等材料。
二 符合标准：
   符合GB 8410-2006  汽车内饰材料的燃烧特性
三 主要技术参数：
1、试样支架：端面到个孔38mm
            孔到第二孔100±0.2 mm
            孔到第三孔254±0.2 mm
2、燃气灯灯嘴内径Φ9.5mm，灯嘴口部中心距试样下端19mm
3、燃气：液化气或热值在35MJ/m3-3835MJ/m3的其它可燃气体。
4、金属梳：长度至少为110mm，每25mm内有7-8个光滑圆齿
5、秒表：准确度≥0.5s
6、温度计：量程150℃以上，准确度为1℃
7、钢板尺：量程400mm以上，准确度1mm
8、外形尺寸：385×204×365mm
四 原理：
将试样水平地夹持在U型支架上，在燃烧箱中用规定高度火焰点燃试样的自由端15s后，确定试样上火焰是否熄灭，或何时熄灭，以及试样燃烧的距离和燃烧该距离所用的时间。

QCS car interior combustion apparatus          
A product introduction
The instrument used to measure the car interior trim material level combustion characteristic.Interior materials refer to: car interior parts used in a single material or laminated composites, such as seat cushion, seat, seat cover, seat belts, headrest, armrest, activity type folding roof, all decorative plate (including the gate guard, side retaining plate, after retaining plate, car roof repair) dashboard, empty shelves inside or rear window bedplate, curtain, floor, cover, sun visor, and any other indoor organic material, including packing, buffering device crash to absorb collision energy etc.
Two standard:
In line with the GB 8410-2006, the combustion characteristic of auto interior materials
Three main technical parameters:
1, sample holder: face to the first hole 38 mm
The first hole to the second hole 100 + / - 0.2 mm
The first hole to the third hole 254 + / - 0.2 mm
2, gas lamp light mouth Φ 9.5 mm inner diameter, light mouth mouth center distance sample bottom 19 mm
3, gas, liquefied petroleum gas or calorific value in 35 mj/m3-3835 mj/m3 of other flammable gases.
4, metal comb: at least 110 mm in length, 7-8 times every 25 mm smooth crenate
5, a stopwatch: accuracy acuity 0.5 s
6, thermometer: range over 150 ℃, the accuracy of 1 ℃
7, steel tape: range above 400 mm, the accuracy of 1 mm
8, appearance size: 385 * 204 * 204 mm
Four principles:
The sample clamping on the u-shaped bracket horizontally, with specified high flame combustion box in the free end of the sample after 15 s, determine whether the sample on the flame extinguished, or when to go out, and the sample distance and combustion the time required for the distance.