HEM灰分测定仪
灰分测定仪产品详细介绍：
一、灰分测定仪设备特点：
1）升温快 由100℃升温指1000℃，小于30分钟
2）灰化快 作灰化炉用时，可开进出风孔，加烟筒，有利于补进新鲜氧气，加速灰化
3）重量轻 6升炉型炉体仅重52公斤
4）节能性好 6升炉型采用16A/200V
5）热污染少 由于新型材料绝热性好，升温至1000℃，并保持1小时后，外壳表面不烫手 （约60℃）
6）恒温时控 各工步温度升到设定值后，定时器自动开始工作，按设定时间保持恒温
7）控温精密 具备多种温控器可供选择，进入保持状态后，温度波动小/采用P 型多工步温控器，各工步温度升温斜率均可预置
8）实用安全 具有开门自动断电功能，使用非常安全
二、高温烧解炉技术参数
控制方式 | 单点程控 |
适用电源 | AC 200V |
工步数 | 1 |
温度稳定性（满量程） | 1％FS |
定时设定范围 | 999min |
三、高温烧解炉温度控制器技术参数
炉型 | 6L |
温度上升时间 | 100-1000℃<30min |
电源类型 | AC 200V 16A |
功率（KW） | 2 |
发热体类型 | 电阻丝 |
传感器类型 | K |
炉腔尺寸W×D×H | 200×250×120mm |
炉体尺寸W×D×H | 550×530×430mm |
净重（kg） | 52 |
Burn on high temperature furnace
Burn on high temperature furnace products detail says:
A furnace equipment, high temperature burning solutions:
1) warming faster by 100 ℃ temperature 1000 ℃, less than 30 minutes
2) quick ashing as ashing furnace, can into the wind hole, pipe, is conducive to fill in fresh oxygen, accelerate ashing
3) light weight 6 litres of furnace type furnace only 52 kg
4) good energy-saving type 6 litres of furnace using 16 a / 200 v
5) thermal pollution due to less new materials good insulation, heat up to 1000 ℃, and keep an hour later, the shell surface is not hot (about 60 ℃)
6) thermostatic control each step after the temperature reaches the set value, the timer automatically start to work, according to the set time constant temperature
7) precision of temperature control with multiple thermostat to choose from, after entering the maintain state, temperature fluctuations for small/P type step multiplex temperature controller, each step working temperature ramp rate can be preset
8) practical security has open the door automatically power off function, use very safe
Second, the high temperature burning furnace temperature controller parameters
The control mode
A single point of SPC
Applicable to the power supply
AC 200 v
Work steps
1
Temperature stability (full scale)
1% FS
Time setting range
999 min
3, high temperature burning furnace technical parameters
